New Hejnar Photo Manfrotto conversion set for system using 3433PL Mounting plate. (supplied with the 3433, 3460, 3465 heads, 501 & 503 Pro Video heads and system using special 501PLONG accessory plate).
This combination of plate (5.50 inch long) and clamp will let you use Manfrotto with arca swiss equipment. Clamp can disconnected from plate and use independent on other equipment if needed. Using provided aligning pins clamp can be mounted in any orientation. Markins including level release clamp. Really Right Stuff, including level release plate.
Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series). Other Arca swiss type products. Socket is countersunk on top for 1/4-20 screw but also threaded 3/8-16.Two set of outside holes are taped 1/4-20 and 45mm or 30 mm apart from each other. Clamp includes two safety stop relief grooves. This prevents free fall when the clamp is not fully closed and your plate has safety stops. Knob stops at maximum opening - cannot be lost in the field. Clamp knob is made from one piece.
No spacers or bushing between knob and clamp itself. No room for dust, sand etc to enter inside. Black hard coat anodized clamp and clear anodized knob.Black hard coat anodized surface. One 3.25 inch clamp (Model F63b). Hex key for ¼-20 screw. This item is in the category "Cameras & Photo\Tripods & Supports\Other Tripods & Supports". The seller is "krosno65" and is located in this country: US. This item can be shipped worldwide.