Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs

Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs
Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs
Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs
Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs
Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs
Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs

Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs

PART M229 With F63b Clamp. New Hejnar Photo Manfrotto 229 a conversion set. This combination of plate and clamp (F63b) will let you use Manfrotto head with any arca swiss equipment.

Clamp can disconnected from plate and use independent on other equipment if needed. If you prefer clamp can be positioned in relation to adapter plate in 90 degree increments to make it convenient for everybody, or what are you used to. It is the best quick release system for tripods and monopods. International standard dove-tail clamp, compatible with Arca-Swiss type quick release plates. Adapter plate is attached to Manfrotto geared head in two simple steps.

1 removing lock down level and safety mechanizm. 2 Connect plate to geared head using one M5 screw and one 3/8-16 screw. Socket is countersunk on top for 1/4-20 screw but also threaded 3/8-16. Two set of outside holes are taped 1/4-20 and 45mm or 30 mm apart from each other.

Clamp includes two safety stop relief grooves. This prevents free fall when the clamp is not fully closed and your plate has safety stops. Knob stops at maximum opening - cannot be lost in the field. Clamp knob is made from one piece.

No spacers or bushing between knob and clamp itself. No room for dust, sand etc to enter inside. Black hard coat anodized clamp and clear anodized knob. Four holes taped 10-32 and placed aroud 1/4 hole in 90 degree increament.

Hole to hole mounting hole distance between 10-32 holes is 45mm. One 3.25 inch clamp (Model F63b).

One 1/4-20 x 3/4 screws. One M5 x18 screw for plate mount. One 3/8-16 x3/4 screw for plate mount. Hex key for all mounting screws.

If you have question about my product please read FAQ. If this does not answer your question please drop me a line. This item is in the category "Cameras & Photo\Tripods & Supports\Other Tripods & Supports". The seller is "krosno65" and is located in this country: US. This item can be shipped worldwide.


Manfrotto 229 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs


Homepage    Links    Contact Us    Privacy Policy    Terms of Use