It gives you naturally smooth shots from any moving Platform. A Complete Carrying Solution Modular System with a Convenient Flight case simplifies travel and storage and makes it possible to take Grip Master as hand-luggage. Compatible with All Major Gimbal Systems The Grip Master comes equipped with a Quick Release for Ronin M/MX. However, it has all the necessary threading so you can adapt it to any major Gimbal System. WHAT'S IN THE BOX.
8 x Magnetic Suction Cups with Silicone Dust Covers - 4 x Small Rosette Arms (90mm) - 4 x Medium Rosette Arms (120mm) - 4 x Large Rosette Arms (150mm) - 2 x Safety Belts - Gimbal Vibration Isolator - Ronin Mounting Plate - Multi Angle Ronin Wedge Plate - Flight Transport Case. Construction : High-grade CNC Aluminum - Magnets Pulling Force : 500kg / 1100lb - Load Capacity : Still : 30kg/66lb Running : 15Kg/33lb - Max Speed : 200 km/h - Gimbal Mounting Plate : For DJI Ronin / Ronin-M / Ronin-MX brushless gimbals INCLUDED Note: Compatible with other Gimbals, but other mounting plates are Not Included.
Product Weight : 9.8kg / 21.6lb - Product Weight (With Packing) : 26.6 Kg / 58.5lb - Box Dimensions : 66cm x 55.5cm x 41cm. Proaim Grip Master comes equipped with 8 Powerful Magnets that ensure a very strong grip necessary for working with expensive moviemaking equipment. The Grip Master comes with 2 Safety Belts to Setup safety lines for your Gimbal and Camera Setups.Smart Design for Quick Setups. The Gripper usually requires no additional grip and rigging hardware. Just Pop it out from the box and place it on any Metal Platform. Each joint has an Arri Rosette which makes it extremely simple to adjust the position of the magnets to curves and angles of different platforms. Quick Levelling and Setup Mounting.
The Grip Master comes equipped with a Multi Angle Wedge plate to level the gimbal and camera setup quickly. Included is a Ronin M/Mx Quick Release Plate so you can easily attach Ronin M/MX to the Grip Master. For all other Gimbal system we have Quick Release plates available which can be mounted on the Gripper easily. Get the Smoothest Shots even at High Speed.
The Wire Isolator incorporated into the Proaim Grip Master absorbs the shocks, bumps and high-frequency vibrations while also damping low-frequency oscillations by utilizing strategically configured cables. You can be going as fast as 200km/h and the isolator in conjunction with the camera gimbal makes sure you get incredibly smooth shots even on rough terrains. If you hard-mount a gimbal setup to a moving platform, any Jerky movement creates an Enormous amount of stress on the Motors and Bearings of the Gimbal as it tries to stabilize the camera.
High-Frequency Vibrations created by moving parts such as motors, rotor blades or propellers and Low Frequency are all absorbed by the sudden changes in direction are all absorbed by the Wired Isolator. This reduces the stress on your gimbal motors that now have to work only to stabilize a softened range of vibrations which in turn increases the life of your Gimbal. We will try to give our best to our clients. There May be some delay in processing orders placed on weekends.
Custom charges are the responsibility of the buyers! Return is accepted within 14 days of receiving the item. Please Don't return the item without informing us.Please send photographs showing damage or any other problem in the product. This will help us both to avoid any type of confusion. Our aim is to Provide Top Level Customer Service, so we will try our best to solve any problem (if any). This item is in the category "Cameras & Photo\Camera, Drone & Photo Accessories\Other Camera & Photo Accs".shop" and is located in this country: IN. This item can be shipped worldwide.