All the joints and connections can be adjusted by unfastening a few knobs, and the entire setup is completely Tools Free. WHAT'S IN THE BOX. 4 x Suction Cups - 4 x Dust Covers - 4 x Rosette Extension Arms - Gimbal Vibration Isolator - Ronin Mounting Plate - V-mount Battery Plate - 2 x Safety Belts - 4 x Rubber Sleeves - Flight Case. Construction : High-grade CNC Aluminum - Load Capacity : Still & Running: 5-15kg / 11-33lb - Maximum speed : 200 km/h - Wire Cable Thickness : 5/32'' (4mm) - Rosette Extension Arm : 50 PSI (Pounds per Square Inch) - Product weight(without packing) : 19.44kg / 42.85lb - Product weight(with packing) : 24kg / 52.91lb - Safety Hints : CAUTION : Recheck Pump every 90 minutes. If the red line is visible, Re-pump the cup without losing the remaining vacuum, till the Red Line disappears.Compatible with all Major Gimbal Systems : The Gripmax comes equipped with a Quick Release for Ronin M/MX. However, it has all the necessary threading so you can adapt it to any major Gimbal System. Travel in Style with Gripmax : The Proaim Gripmax comes snugly fit into a high strength Polycarbonate Case with custom cut foam so you can secure your equipment after use. Power Up : The V-Mount Battery Plate has been incorporated into the design to provide power to your accessories and camera.
Get the Smoothest Shots even at High Speeds. The Wire Isolator incorporated into the Proaim Gripmax absorbs the shocks, bumps and high-frequency vibrations while also damping low-frequency oscillations by utilizing strategically configured cables. You can be going as fast as 200km/h and the isolator in conjunction with the camera gimbal makes sure you get incredibly smooth shots even on rough terrains. If you hard-mount a gimbal setup to a moving platform, any jerky movement creates an enormous amount of stress on the Motors and Bearings of the Gimbal as it tries to stabilize the camera. High-Frequency Vibrations created by moving parts such as motors, rotor blades or propellers and Low Frequency vibrations such as sudden changes in direction are all absorbed by the Wired Isolator.This reduces the stress on your gimbal motors that now have to work only to stabilize a softened range of vibrations which in turn increases the life of your Gimbal. We understand mounting equipment worth thousands of dollars on the front of a moving car going at 100mph can be nerve-wracking. That is why we have spent a countless number of hours to find and test the Perfect Type of Suction Cup that can handle all the stress placed on it and stay completely secure and stable at all kinds of high speeds. We use Industrial Grade 6 suction cups that have rated load capacities and are known to stay in place very securely. We even went ahead and took care of the fact that we needed a type of suction cup that doesn't damage that glossy finish on your beloved car or any other surface it is mounted on. It comes complete with all kinds of safety and protection accessories you might need. Not Just the Suction Cups, each and every part of the Proaim Gripmax has been made by using the highest quality of Aluminum Alloys, Polymers and Stainless-Steel to ensure a rock-solid system that stands the test of time. There may be some delay in processing orders placed on weekends.
Return is accepted within 30 days of receiving the item sent. The return is acceptable only in case of manufacturing or functionality problem in the product. Our aim is to Provide Top Level Customer Service, We will try our best to solve any problem (if any). This item is in the category "Cameras & Photo\Camera, Drone & Photo Accessories\Other Camera & Photo Accs". The seller is "proaimcanada" and is located in this country: CA.
This item can be shipped to Canada, United States.