This window net mount kit utilizes a strong aircraft grade mini quick release latch which allows for the driver, or safety officials, to release and drop the window net with one quick motion to the release lever. The mini quick release latch lever is much easier to operate while wearing thick safety gloves than the traditional buckle buttons, allowing the driver to exit the car quickly during an emergency situation. The window net mount kit is very strong, the latch is designed to be welded to the 1/2. The top tube has a 1/8" 4130 bracket on the opposite side of the latch that slides into the 1/8" 4130 slotted bracket, which welds to the roll cage. The slotted bracket design keeps the top tube and latch from rotating to maintain proper latch alignment.The bottom mounting tube is also made of 1/2. The back side of the bottom tube welds directly to the side bar or main hoop of the roll cage. The front of the bottom tube is removable for the service of the window net and features a flattened area with a 1/4 hole to be bolted to the chassis. A hole will need to be drilled into the side bar of the chassis to weld the provided threaded bung flush with the tube. Use the provided 1/4"-28 X 5/8" BHSCS screw to attach the bottom mounting tube to the chassis. This item is in the category "eBay Motors\Parts & Accessories\Performance & Racing Parts\Auto Performance Parts\Chassis, Suspension & Brakes\Other". The seller is "quarter-max" and is located in this country: US. This item can be shipped to United States.